ZyXEL Communications IES-612-51A Table 67 TLS PVC, Figure 107 TLS PVC

Chapter 30 TLS PVC

Figure 107 TLS PVC

The following table describes the labels in this screen.

Table 67 TLS PVC

LABEL	DESCRIPTION
Port	Use this drop-down list box to select a port for which you wish to set up a TLS
	PVC. This field is read-only once you click on a port number below.
VPI	Type the Virtual Path Identifier for a channel on this port.
VCI	Type the Virtual Circuit Identifier for a channel on this port.
DS VC Profile	Use the drop-down list box to select a VC profile to use for this channel’s
	downstream traffic shaping.
US VC Profile	Use the drop-down list box to select a VC profile to use for this channel’s
	upstream traffic. The IES-612-51A does not perform upstream traffic policing if
	you do not specify an upstream VC profile.
	Note: Upstream traffic policing should be used in conjunction with
	the ATM shaping feature on the subscriber’s device. If the
	subscriber’s device does not apply the appropriate ATM
	shaping, all upstream traffic will be discarded due to
	upstream traffic policing.
VID	Type a VLAN ID to assign to frames received on this channel.
	Note: Make sure the VID is not already used for PPPoA-to-
	PPPoE conversions.
Priority	Use the drop-down list box to select the priority value (0 to 7) to add to incoming
	frames without a (IEEE 802.1p) priority tag.
Apply	Click this to add or save channel settings on the selected port.
	This saves your changes to the IES-612-51A’s volatile memory. The IES-612-
	51A loses these changes if it is turned off or loses power, so use the Config
	Save link on the navigation panel to save your changes to the non-volatile
	memory when you are done configuring.
Cancel	Click Cancel to start configuring the screen again.

	213
IES-612-51A User’s Guide