Chapter 41 Commands Summary

Table 88

Commands (continued)

 

 

 

CLASS

 

COMMAND

PARAMETERS

DESCRIPTION

P

 

 

timeserver set

<daytime> <ip>

Sets the time service protocol,

H/H

 

 

 

[nosync]

time server’s IP address and the

 

 

 

 

 

device’s time zone.

 

 

 

timeserver set

<timentp> <ip>

Sets the time service protocol,

H/H

 

 

 

<utc[<+-

time server’s IP address and the

 

 

 

 

>0100~1200]>

device’s time zone.

 

 

 

 

[nosync]

 

 

 

 

timeserver sync

 

Retrieves the date and time from

H/H

 

 

 

 

the time server.

 

 

 

log show

 

Displays the device’s logs.

M/L

 

 

log clear

 

Clears the device’s logs.

H/H

 

 

wdog show

 

Displays the current watchdog

H/~

 

 

 

 

firmware protection feature status

 

 

 

 

 

and timer.

 

 

 

 

 

 

 

 

 

wdog set

<msec0:disable>

Sets the watchdog count. 0 turns

H/~

 

 

 

 

the watchdog off.

 

 

 

monitor show

 

Displays the hardware monitor’s

L/L

 

 

 

 

statistics.

 

 

 

monitor enable

 

Turns the hardware monitor on.

H/H

 

 

monitor disable

 

Turns the hardware monitor off.

H/H

 

 

monitor vlimit

<idx> <high> <low>

Sets the maximum (<high>) or

H/H

 

 

 

 

minimum (<low>) voltage at the

 

 

 

 

 

specified voltage sensor. You can

 

 

 

 

 

specify a voltage with up to three

 

 

 

 

 

digits after a decimal point (0.941

 

 

 

 

 

for example).

 

 

 

 

 

Normal voltage at each sensor:

 

 

 

 

 

Idx: 1=1.2v, 2=1.8v, 3=3.3v, 4=24v

 

 

 

 

 

 

 

 

 

monitor tlimit

<idx> <high> <low>

Sets the maximum (<high>) or

H/H

 

 

 

 

minimum (<low>) temperature at

 

 

 

 

 

the specified temperature sensor.

 

 

 

 

 

You can specify a temperature

 

 

 

 

 

with up to three digits after a

 

 

 

 

 

decimal point (-50.025 for

 

 

 

 

 

example).

 

 

 

 

 

Temperature sensor locations:

 

 

 

 

 

Idx: 1=DSL, 2=CPU, 3=HW

 

 

 

 

 

monitor

 

 

 

 

 

 

 

 

 

user online

 

Displays online user info.

M/~

 

 

user enable

<name>

Turns on the specified user name

H/H

 

 

 

 

of multi-login.

 

 

 

user disable

<name>

Turns off the specified user name

H/H

 

 

 

 

of multi-login.

 

 

 

user set

<username>

Creates or edits the password and

H/H

 

 

 

<password>

privilege level of the specified

 

 

 

 

<highmiddlelow>

user name.

 

 

 

user delete

<name>

Removes the specified user name

H/H

 

 

 

 

of multi-login.

 

260

 

IES-612-51A User’s Guide