ZyXEL Communications IES-612-51A 51.1.4 Trap Community Command, 51.1.6 Show SNMP Settings Command, 51.1.5 Trap Destination Set Command

Chapter 51 SNMP Commands

where

<ip> = The IP address of a trusted host.

Use this command to add the host IP address to the list of trusted hosts. If you enter a trusted host, your IES-612-51A will only respond to SNMP messages from this address. If you leave the trusted host set to 0.0.0.0 (default), the IES-612-51A will respond to all SNMP messages it receives, regardless of source.

51.1.4 Trap Community Command

Syntax:

ras> sys snmp trapcommunity <community>

where

<community> = The password sent with each trap to the SNMP manager.

Enter this command with the community to set the password.

51.1.5 Trap Destination Set Command

Syntax:

ras> sys snmp trapdst set <index> <ip> [<port>]

where

<index>	=	The number of the trap server (1~4).
<ip>	=	The IP address of the trap server.
[<port>]	=	The port number upon which the trap server listens for
		SNMP traps. The IES-612-51A uses the default of 162 if
		you do not specify a trap port.

Use this command specify the IP address (and port number) of a trap server to which the IES- 612-51A sends SNMP traps. If you leave the trap destination set to 0.0.0.0 (default), the IES- 612-51A will not send any SNMP traps.

51.1.6 Show SNMP Settings Command

Syntax:

ras> sys snmp show

This command displays the current SNMP get community, set community, trap community, trusted hosts and trap destination settings.

342
	IES-612-51A User’s Guide