ZyXEL Communications IES-612-51A manual 273

Chapter 41 Commands Summary

Table 88	Commands (continued)
CLASS		COMMAND	PARAMETERS	DESCRIPTION	P
		dot1x disable		Turn off dot1x.	H/H
		dot1x auth	<profileradius>	Set authentication method to	H/H
				profile or radius.
		dot1x port enable	<portlist>	Turn on dot1x on port.	H/H
		dot1x port disable	<portlist>	Turn off dot1x on port.	H/H
		dot1x port control	<portlist>	Set port authentication status.	H/H
			<autoauthunauth>
		dot1x port reauth	<portlist>	Turn on or turn off port to do	H/H
			<onoff>	reauthentication.
		dot1x port period	<portlist>	Set port reauth period.	H/H
			<period>
		dot1x radius show		Display radius server settings.	M/L
		dot1x radius ip	<ip>	Set Radius server IP.	H/H
		dot1x radius port	<port>	Set Radius server port.	H/H
		dot1x radius	<secret>	Set Radius server secret.	H/H
		secret
		dot1x profile show		Display accounts for profile mode.	M/L
		dot1x profile set	<name> <password>	Set account and password for	H/H
				profile mode.
		dot1x profile	<name>	Remove account for profile mode.	H/H
		delete
		enet show		Displays the Ethernet port	M/L
				settings.
		enet speed	<portlist>	Sets the Ethernet port(s)	H/H
			<10copper100coppe	connection speed.
			rauto>
		enet name	<portlist> <name>	Sets the Ethernet port(s) name.	H/H
		enet enable	<portlist>	Turns on the specified Ethernet	H/H
				port(s).
		enet disable	<portlist>	Turns off the specified Ethernet	H/H
				port(s).
		enet reset	<portlist>	Reset the ENET interface	H/H
		enet length show		Manually set the ENET cable	M/~
				length, this is used for very rare
				cases when connect to some
				ENET PHY, in most cases, should
				set to auto(system default)
		enet length set	<portlist>	Display the ENET cable length	H/~
			auto<length>	setting, <length>: 0-15, in units of
				10 m
		smcast show		Display all MAC addresses joined	M/L
				to ADSL ports.

	273
IES-612-51A User’s Guide