Chapter 34 Access Control

Figure 115 SNMP

The following table describes the labels in this screen.

Table 76 SNMP

LABEL

DESCRIPTION

Return

Click Return to go back to the previous screen.

 

 

Get Community

Enter the get community, which is the password for the incoming Get- and

 

GetNext- requests from the management station.

 

 

Set Community

Enter the set community, which is the password for incoming Set- requests from

 

the management station.

 

 

Trap Community

Enter the trap community, which is the password sent with each trap to the

 

SNMP manager.

 

 

Trap Destination

Enter the IP address of a station to send your SNMP traps to.

1~4

 

 

 

Port

Enter the port number upon which the station listens for SNMP traps.

 

 

Trusted Host

A “trusted host” is a computer that is allowed to use SNMP with the IES-612-

 

51A.

 

0.0.0.0 allows any computer to use SNMP to access the IES-612-51A.

 

Specify an IP address to allow only the computer with that IP address to use

 

SNMP to access the IES-612-51A.

 

 

Apply

Click Apply to save your changes to the IES-612-51A’s volatile memory. The

 

IES-612-51A loses these changes if it is turned off or loses power, so use the

 

Config Save link on the navigation panel to save your changes to the non-

 

volatile memory when you are done configuring.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

34.5 Service Access Control Screen

To open this screen, click Advanced Application, Access Control, Service Access Control.

 

229

IES-612-51A User’s Guide