Chapter 53 Virtual Channel Management Commands

where

<sec>

= The number of seconds (10~10000) the device is to keep the

 

Address Resolution Protocol table’s entries of IP addresses

 

of 2684 routed mode gateways. Use 0 to disable the aging

 

time.

This command configures how long the device stores the IP addresses of CPE devices using 2684 routed mode in the Address Resolution Protocol table.

The following example sets the device to store the IP addresses 2684 routed mode gateways in the Address Resolution Protocol table for 500 seconds.

Figure 280 RPVC ARP Agingtime Command Example

ras> adsl rpvc arp agingtime set 500

53.7.12 RPVC ARP Agingtime Show Command

Syntax:

ras> adsl rpvc arp agingtime show

This command displays how long the device stores the IP addresses of 2684 routed mode gateways in the Address Resolution Protocol table.

The following is an example.

Figure 281 RPVC ARP Agingtime Show Command Example

ras> adsl rpvc arp agingtime show rpvc aging time (sec): 500

53.7.13 RPVC ARP Show Command

Syntax:

ras> adsl rpvc arp show

This command displays how long the device stores the IP addresses of 2684 routed mode gateways in the Address Resolution Protocol table.

The following is an example.

Figure 282 RPVC ARP Agingtime Show Command Example

ras> adsl rpvc arp show

gateway ip

vid

mac

192.168.10.102---------------

----

-----------------

1

00:0d:9d:d9:43:3b

53.7.14 RPVC ARP Flush Command

Syntax:

ras> adsl rpvc arp flush

 

391

IES-612-51A User’s Guide