Chapter 17 IGMP

 

Table 36 IGMP Bandwidth (continued)

 

LABEL

DESCRIPTION

 

Apply

Click Apply to save your changes to the IES-612-51A’s volatile memory. The

 

 

IES-612-51A loses these changes if it is turned off or loses power, so use the

 

 

Config Save link on the navigation panel to save your changes to the non-

 

 

volatile memory when you are done configuring.

 

 

 

 

Index

Select a unique number for this setting. If you select a number that is already

 

 

used, the new setting overwrites the old one when you click Apply.

 

 

 

 

Start Multicast IP

Enter the beginning of the multicast range.

 

 

 

 

End Multicast IP

Enter the end of the multicast range. For one multicast address, enter the start

 

 

of the multicast range again.

 

 

 

 

Bandwidth

Enter the bandwidth requirement for the specified multicast range.

 

 

 

 

Apply

Click Apply to save the filter settings. The settings then display in the summary

 

 

table at the bottom of the screen.

 

 

Clicking Apply saves your changes to the IES-612-51A’s volatile memory. The

 

 

IES-612-51A loses these changes if it is turned off or loses power, so use the

 

 

Config Save link on the navigation panel to save your changes to the non-

 

 

volatile memory when you are done configuring.

 

 

 

 

Cancel

Click Cancel to begin configuring the fields afresh.

 

 

 

 

 

This table shows the multicast range settings.

 

 

 

 

Index

This field displays the number that identifies this setting.

 

 

 

 

Start Multicast IP

This field displays the beginning of the multicast range.

 

 

 

 

End Multicast IP

This field displays the end of the multicast range.

 

 

 

 

Bandwidth

This field displays the allowed bandwidth for the specified multicast range.

 

 

 

 

Select

Select this, and click Delete to remove the setting.

 

 

 

 

Delete

Click this to remove the selected settings.

 

 

 

 

Select All

Click this to select all entries in the table.

 

 

 

 

Select None

Click this to un-select all entries in the table.

 

 

 

17.4.1 Bandwidth Port Setup Screen

Use this screen to set up multicast bandwidth requirements for specific ports. To open this screen, click Advanced Application, IGMP, Bandwidth Setup, Port Setup.

Figure 71 Bandwidth Port Setup

 

157

IES-612-51A User’s Guide