Chapter 42 Command Examples

42.3.2 Log Clear Command

Syntax:

ras> sys log clear

This command clears the system error log.

"If you clear a log (using the log clear command), you cannot view it again.

42.3.3Info Show Command

Syntax:

ras> sys info show

This command shows general system settings, the BIN (firmware) version, system uptime and bootbase version.

An example is shown next.

Figure 134 Info Show Example

ras> sys info show Hostname: Location: Contact:

Model: AAM1212-51

ZyNOS version: V3.52(ABA.0) 07/07/2006 F/W size: 2747672

MAC address: 00:13:49:DE:00:AD System up time: 0(days) : 22:31:49

Bootbase version: V1.03(AAM1212-51) 02/18/2005 F/W build date: Jul 7 2006 10:00:31

DSP code version: 6.04.0003 Hardware version:

Serial number:

42.4 Isolation Commands

Turn on port isolation to block communications between subscriber ports. When you enable port isolation, you do not need to configure the VLAN to isolate subscribers.

42.4.1 Isolation Show Command

Syntax:

ras> switch isolation show

This command displays the current setting of the subscriber isolation feature.

280

 

IES-612-51A User’s Guide