ZyXEL Communications IES-612-51A manual 58

Chapter 3 Front Panel

Figure 14 Installation Scenario C

3.2.7.3.1 Procedure To Connect To MDFs

1Connect the Telco-50 connector end of the cable to the Telco-50 connector.

2Connect the USER wiring on the other end of the Telco-50 cable to the upper ports of MDF 3 using a punch-down tool.

3Connect the lower ports of MDF 3 to the upper ports of MDF 2 for those users that want DSL service. (Users who want telephone service only, retain the original connection from the top port of MDF 2 to the bottom port of MDF 1.)

4Connect the telephone wiring from the end-user's DSL equipment to the lower ports of MDF 2.

5Connect the CO wiring of the Telco-50 cable to the lower ports of MDF 4 using a punch- down tool.

6Connect the top ports of MDF 4 to the bottom ports of MDF 1 using telephone wires.

7Connect the top ports of MDF 1 to the telephone company.

58
	IES-612-51A User’s Guide