42
Command Examples
This chapter gives some examples of commands.
42.1 Command Examples Overview
These are commands that you may use frequently in configuring and maintaining your IES-
42.2 Sys Commands
These are the commonly used commands that belong to the sys (system) group of commands.
42.2.1 Log Show Command
Syntax:
ras> sys log show
This command displays the system error log. An example is shown next.
Figure 133 Log Show Command Example
ras> | sys log show | telnetd | INFO | Session Begin! | |||
1 | Wed Aug 11 | 20:37:11 2004 | |||||
2 | Wed Aug | 11 | 20:37:05 2004 | telnetd | INFO | Session | Begin! |
3 | Wed Aug | 11 | 20:36:56 2004 | telnetd | INFO | Session | Begin! |
|
|
|
|
|
|
|
|
42.3 Log Format
The common format of the system logs is: <item no> <time> <process> <type> <log message>.
Table 89 Log Format
LABEL | DESCRIPTION |
<item no> | This is the index number of the log entry. |
<time> | This is the time and date when the log was created. |
<process> | This is the process that created the log. |
| 277 |
|
|