Chapter 47 IGMP Commands

where

<bandwidth>

= Allowed bandwidth between 1 and 1000 000 kbps (kilo bits

 

per second).

This command sets the default bandwidth for multicast channels for which you have not configured bandwidth requirements yet. Multicast bandwidth settings on channels (using the switch igmpsnoop bandwidth set command) have higher priority over this default setting.

47.4.2 IGMP Bandwidth Set Command

Syntax:

ras> switch igmpsnoop bandwidth set <index> <start-mcast-ip> <end-mcast-ip> <bandwidth>

where

<index>

=

1..96; a unique number for this setting.

<start-mcast-

=

224.0.0.0..239.255.255.255; the beginning of the multicast

ip>

 

range.

<end-mcast-ip>

=

224.0.0.0..239.255.255.255; the end of the multicast range.

 

 

It must be greater than <start-mcast-ip>.

<bandwidth>

=

1..100000, in units of kbps

This command configures bandwidth allocation for the multicast channel(s). For multicast channel(s) for which you have not configured bandwidth settings, the default multicast bandwidth setting applies (see the switch igmpsnoop bandwidth default command).

47.4.3 IGMP Bandwidth Delete Command

Syntax:

ras> switch igmpsnoop bandwidth delete <index>

where

<index>

= 1..96; a unique number for this setting.

This command removes the specified multicast bandwidth configuration profile.

47.5 IGMP Bandwidth Port Commands

Use the IGMP bandwidth port commands to set up bandwidth budgets for multicast traffic on specific ports.

 

317

IES-612-51A User’s Guide