ZyXEL Communications IES-612-51A manual 204

Chapter 28 PPPoA to PPPoE

Figure 102 PPPoA to PPPoE

The following table describes the labels in this screen.

Table 63 PPPoA to PPPoE

LABEL	DESCRIPTION
Port	Use this drop-down list box to select a port for which you wish to set up PPPoA
	to PPPoE conversions. This field is read-only once you click on a port number
	below.
VPI	Type the Virtual Path Identifier for a channel on this port.
VCI	Type the Virtual Circuit Identifier for a channel on this port.
DS VC Profile	Use the drop-down list box to select a VC profile to use for this channel’s
	downstream traffic shaping.
US VC Profile	Use the drop-down list box to select a VC profile to use for this channel’s
	upstream traffic. The IES-612-51A does not perform upstream traffic policing if
	you do not specify an upstream VC profile.
	Note: Upstream traffic policing should be used in conjunction with
	the ATM shaping feature on the subscriber’s device. If the
	subscriber’s device does not apply the appropriate ATM
	shaping, all upstream traffic will be discarded due to
	upstream traffic policing.
PVID	Type a PVID (Port VLAN ID) to assign to untagged frames received on this
	channel.
	Note: Make sure the VID is not already used for multicast VLAN
	or TLS PVC.
Priority	Use the drop-down list box to select the priority value (0 to 7) to add to incoming
	frames without a (IEEE 802.1p) priority tag.

204
	IES-612-51A User’s Guide