Chapter 52 ADSL Commands

where

<portlist>

=

You can specify a single DSL port <1>, all DSL ports <*> or

 

 

a list of DSL ports <1,3,5>. You can also include a range of

 

 

ports <1,5,6~10>.

<tel>

=

a DSL subscriber’s telephone number. You can use up to 15

 

 

ASCII characters (including spaces and hyphens).

This command records the telephone number of a DSL subscriber telephone number. The following example records the telephone number 12345678 for DSL port 5.

Figure 221 DSL Port Tel Command Example

ras> adsl tel 5 12345678

52.1.10 DSL Port Loopback Command

Syntax:

ras> adsl loopback <portlist> < f5> <vpi> <vci>

where

<portlist>

=

You can specify a single DSL port <1>, all DSL ports <*>

 

 

or a list of DSL ports <1,3,5>. You can also include a range

 

 

of ports <1,5,6~10>.

< f5>

=

Use f5 to perform an OAMF5 loopback test on the specified

 

 

DSL port. An Operational, Administration and Maintenance

 

 

Function 5 test is used to test the connection between two

 

 

DSL devices. First, the DSL devices establish a virtual

 

 

circuit. Then the local device sends an ATM F5 cell to be

 

 

returned by the remote DSL device (both DSL devices must

 

 

support ATM F5 in order to use this test).

<vpi> <vci>

=

When you perform an OAMF5 loopback test, specify a VPI/

 

 

VCI.

This command has the IES-612-51A perform an OAMF5 loopback test on the specified DSL port(s).

The following example has the IES-612-51A perform an OAMF5 loopback test on DSL port 1’s PVC at VPI 0 and VCI 33.

Figure 222 DSL Port Loopback Command Example

ras> adsl loopback 1 f5 0 33

port[1] OAM F5 loopback test: failed

52.1.11 DSL Port Upstream PSD Command

Syntax:

ras> adsl usnompsd <portNo> [<max nominal psd>]

 

349

IES-612-51A User’s Guide