Chapter 47 IGMP Commands

47.5.1 IGMP Bandwidth Port Disable Command

Syntax:

ras> switch igmpsnoop bandwidth port disable <portlist>

where

<portlist>

= You can specify a single DSL port <1>, all DSL ports <*>

 

or a list of DSL ports <1,3,5>. You can also include a range

 

of ports <1,5,6~10>.

This command deactivates multicast bandwidth settings of the specified port.

47.5.2 IGMP Bandwidth Port Enable Command

Syntax:

ras> switch igmpsnoop bandwidth port enable <portlist>

where

<portlist>

= You can specify a single DSL port <1>, all DSL ports <*>

 

or a list of DSL ports <1,3,5>. You can also include a range

 

of ports <1,5,6~10>.

This command activates multicast bandwidth setting on the specified port.

47.5.3 IGMP Bandwidth Port Set Command

Syntax:

ras> switch igmpsnoop bandwidth port set <portlist> <bandwidth>

where

<portlist>

=

You can specify a single DSL port <1>, all DSL ports <*>

 

 

or a list of DSL ports <1,3,5>. You can also include a range

 

 

of ports <1,5,6~10>.

<bandwidth>

=

1..100000, in units of kbps

This command sets the bandwidth allowed for multicast traffic on the specified port(s). It does not automatically enable it, however.

47.5.4 IGMP Bandwidth Port Show Command

Syntax:

ras> switch igmpsnoop bandwidth port show <portlist>

318

 

IES-612-51A User’s Guide