33

Syslog

This chapter explains how to set the syslog parameters.

33.1 Syslog

The syslog feature sends logs to an external syslog server.

33.2 SysLog Screen

To open this screen, click Advanced Application, SysLog.

Figure 112 SysLog

The following table describes the labels in this screen.

Table 72 SysLog

LABEL

DESCRIPTION

Enable Unix Syslog

Select this check box to activate syslog (system logging) and then configure the

 

syslog parameters described in the following fields.

 

 

Syslog Server IP

Enter the IP address of the syslog server. (The log facility is specified in Alarm >

 

Alarm Event Setup. See Section 40.4 on page 251.)

 

 

Apply

Click Apply to save your changes to the IES-612-51A’s volatile memory. The

 

IES-612-51A loses these changes if it is turned off or loses power, so use the

 

Config Save link on the navigation panel to save your changes to the non-

 

volatile memory when you are done configuring.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

 

223

IES-612-51A User’s Guide