Chapter 52 ADSL Commands
Figure 239 Annex I Enable Command Example
ras> adsl annexi enable 5
52.1.23 Annex I Disable Command
This command turns off the Annex I all digital mode feature on the specified ADSL2/2+ port(s).
Syntax:
ras> adsl annexi disable <portlist>
The following example turns off the Annex I feature for port 5.
Figure 240 Annex I Disable Command Example
ras> adsl annexi disable 5
52.2 DSL Port Statistics Commands
Use these commands to display DSL port statistics.
52.2.1 DSL Port Show Command
Syntax:
ras> statistics adsl show [portlist]
where
[portlist] | = You can specify a single DSL port <1>, all DSL ports <*> or |
| a list of DSL ports <1,3,5>. You can also include a range of |
| ports <1,5,6~10>. |
This command displays DSL port connection statistics including the status (V for enabled, - for disabled), operational mode, upstream and downstream maximum rates, up time and the number of errored seconds.
The following example displays connection statistics for DSL port 1.
Figure 241 DSL Port Show Command Example
ras> | statistics adsl | show 1 | up time error second(15M/24H) | ||
port | status | mode | up/downstream | ||
1 | V | adsl2 | 512/ 9089 | 00000:00:04:59 | 15/15 |
|
|
|
|
|
|
| 357 |
|
|