Chapter 52 ADSL Commands

52.2.11 SELT Diagnostic Get Command

Syntax:

ras> adsl linediag getselt <port number>

Use this command to display the status and the results of the SELT test on the specified port. The report tells you what gauge of telephone wire is connected to the port and the approximate length of the line measured both in meters and thousands of feet.

The following example displays the status and results SELT diagnostic results for DSL port 1.

Figure 251 Line Diagnostics Get Command Example

ras>

adsl linediag getselt 1

 

port

inprogress

cableType loopEstimateLength

----

-------------------- --------- ------------------

1

INPROGRESS

24AWG

0 m(0.00 kFt)

ras>

adsl linediag getselt 1

 

port

inprogress

cableType loopEstimateLength

----

-------------------- --------- ------------------

1

DONE

24AWG

0 m(0.00 kFt)

 

 

 

 

52.2.12 Tone Diagnostics 992.3 Command

Syntax:

ras> adsl linediag toneDiag <port number>

Use this command to display the tone diagnostics for a port in the format defined in the ITU-T G.992.3 standard. You do not need to use the line diagnostics set command first. Use the tone diagnostics to analyze problems with the physical DSL line.

368

 

IES-612-51A User’s Guide