|
| Chapter 6 Home and Port Statistics Screens |
| Table 7 Port Statistics (DSL) (continued) | |
| LABEL | DESCRIPTION |
| Rx discard packets | This field shows the number of received packets that were dropped on this port. |
|
| Some of the possible reasons for the discarding of received (rx) packets are: |
|
| • The packet filter is enabled and the packets matched a packet filter. |
|
| • The MAC filter is enabled and the |
|
| according to the MAC filter’s configuration. |
|
| • The packets contained frames with an invalid VLAN ID. |
|
|
|
| Errors | This field shows the number of AAL5 frames received with CRC errors. |
|
|
|
| Tx rate | This field shows the number of kilobytes per second transmitted on this port. |
|
|
|
| Rx rate | This field shows the number of kilobytes per second received on this port. |
|
|
|
| Tx bytes | This field shows the number of bytes that have been transmitted on this port. |
|
|
|
| Rx bytes | This field shows the number of bytes that have been received on this port. |
|
|
|
| VPI/VCI | This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier |
|
| (VCI) of channels on this port. |
|
|
|
| Tx Packets | This field shows the number of packets transmitted on each channel. |
|
|
|
| Rx Packets | This field shows the number of packets received on each channel. |
|
|
|
| Tx rate | This field shows the number of bytes per second transmitted on each channel. |
|
|
|
| Rx rate | This field shows the number of bytes per second received on each channel. |
|
|
|
| Tx cells | This field shows the number of ATM cells transmitted on each channel. |
|
|
|
| Rx cells | This field shows the number of ATM cells received on each channel. |
|
|
|
| Errors | This field shows the number of error packets on each channel. |
|
|
|
| Poll Interval(s) | The text box displays how often (in seconds) this screen refreshes. You may |
| Set Interval | change the refresh interval by typing a new number in the text box and then |
|
| clicking Set Interval. |
| Stop | Click Stop to halt system statistic polling. |
|
|
|
| Port | Select a port from the Port |
| Clear Counter | erase the recorded statistical information for that port. |
|
|
|
| Reset | Click this to set the Poll Interval(s) and Port fields to their default values and to |
|
| refresh the screen. |
|
|
|
Use this screen to display RMON statistics about a port. To open this screen, click RMON in the DSL Port Statistics screen or Ethernet Port Statistics screen.
| 81 |
|
|