Chapter 53 Virtual Channel Management Commands
This command displays the gateway IP addresses that are configured for use with 2684 routed mode traffic.
The following is an example.
Figure 272 RPVC Gateway Show Command Example
ras> adsl rpvc gateway show
gateway ip | vid |
1 |
Syntax:
ras> adsl rpvc gateway delete <gateway ip>
where
<gateway ip> | = The IP address of the gateway to which you no longer want |
| the device to send the traffic that the system receives from |
| this PVC. Enter the IP address in dotted decimal notation. |
This command removes a gateway IP address that the device was set to use for 2684 routed mode traffic.
The following example has the device remove a 2684 routed mode traffic gateway entry for IP address 192.168.10.102.
Figure 273 RPVC Gateway Delete Command Example
ras> adsl rpvc gateway delete 192.168.10.102
53.7.5 RPVC Set CommandSyntax:
ras> adsl rpvc set <portlist> <vpi> <vci> <DS vcprofile[,US vcprofile]> <ip>/<netmask> <gateway ip>
where
<portlist> | = | The port(s) of the RPVC. |
|
| You can specify a single DSL port <1>, all DSL ports <*> |
|
| or a list of DSL ports <1,3,5>. You can also include a range |
|
| of ports <1,5,6~10>. |
<vpi> | = | The VPI of the RPVC. |
<vci> | = | The VCI of the RPVC. |
DS vcprofile | = | Assign a VC profile to use for this channel’s downstream |
|
| traffic shaping. |
386 |
| |
| ||
|
|
|