Chapter 17 IGMP
Table 35 IGMP (Status) (continued)
LABEL | DESCRIPTION |
| The first table displays the names of the fields. The subsequent tables show the |
| settings of the IGMP groups. |
|
|
Index | This is the IGMP group index number. |
|
|
VID | The VID is the VLAN ID on which the IGMP group is created. |
|
|
IP Address | This is the IP address of an IP multicast group member. |
|
|
1~12, enet1, enet2 | These columns indicate whether or not each port is a member of the IGMP |
| snooping group. |
|
|
17.4 IGMP Bandwidth Screen
Use this screen to set up bandwidth requirements for multicast channels. To open this screen, click Advanced Application, IGMP, Bandwidth Setup.
Figure 70 IGMP Bandwidth
The following table describes the labels in this screen.
Table 36 IGMP Bandwidth
LABEL | DESCRIPTION |
Port Setup | Click Port Setup to open the Bandwidth Port Setup screen where you can set |
| up multicast bandwidth requirements on specified ports (see Section 17.4.1 on |
| page 157). |
|
|
Default Bandwidth | Enter the default bandwidth for multicast channels for which you have not |
| configured bandwidth requirements. |
|
|
156 |
| |
| ||
|
|
|