|
| Chapter 4 Introducing the Web Configurator |
| Table 4 Web Configurator Screens (continued) | |
| LABEL | DESCRIPTION |
| Alarm Status | Use these screens to view the alarms that are currently in the system. |
|
|
|
| Alarm Event Setup | Use these screens to view and set the severity levels of the alarms and where |
|
| the system is to send them. |
|
|
|
| Alarm Port Setup | Use this screen to set the alarm severity threshold for recording alarms on an |
|
| individual port(s). |
|
|
|
| Management |
|
|
|
|
| Maintenance | Use this screen to perform firmware and configuration file maintenance as well |
|
| as restart the system. |
|
|
|
| Diagnostic | Use this screen to view system logs and test port(s). |
|
|
|
| MAC Table | Use this screen to view the MAC addresses of devices attached to what ports. |
|
|
|
| ARP Table | Use this screen to view the MAC address to IP address resolution table. |
|
|
|
| Config Save |
|
|
|
|
| Config Save | Use this screen to save the device’s configuration into the nonvolatile memory |
|
| (the |
|
| turned off). |
|
|
|
4.5 Changing Your Password
After you log in for the first time, it is recommended you change the default administrator password. Click Basic Setting and then User Account to display the User Account screen.
Figure 17 User Account
Click the index number 1 to edit the default administrator account settings.
| 65 |
|
|