Chapter 53 Virtual Channel Management Commands

pppoe srvcname error

pppoe ac system error

pppoe generic error

=The number of service name errors; for example, the IES- 612-51A’s specified service is different than the BRAS’s setting.

=The number of times the access concentrator experienced an error while performing the Host request; for example, when resources are exhausted in the access concentrator. This value does not include the number of times the IES-612- 51A checks the AC name field in the BRAS's reply PDU and finds a mismatch, however.

=The number of other types of errors that occur in the PPPoE session between the IES-612-51A and the BRAS.

53.9Transparent LAN Service (TLS) Commands

"You can NOT configure PPPoA-to-PPPoE and TLS settings on the same PVC.

53.9.1 TLS PVC Delete Command

Syntax:

ras> adsl tlspvc delete <portlist> <vpi> <vci>

where

<portlist>

=

The port number of the TLS PVC. You can specify a single

 

 

DSL port <1>, all DSL ports <*> or a list of DSL ports

 

 

<1,3,5>. You can also include a range of ports <1,5,6~10>.

<vpi>

=

The VPI of the TLS PVC.

<vci>

=

The VCI of the TLS PVC.

This command clears TLS settings for the PVC.

53.9.2 TLS PVC Set Command

Syntax:

ras> adsl tlspvc set <portlist> <vpi> <vci> <DS vcprofile[,US vcprofile]> <pvid> <priority>

where

<portlist>

=

The port number of the TLS PVC. You can specify a single

 

 

DSL port <1>, all DSL ports <*> or a list of DSL ports

 

 

<1,3,5>. You can also include a range of ports <1,5,6~10>.

<vpi>

=

The VPI of the TLS PVC.

396

 

IES-612-51A User’s Guide