ZyXEL Communications IES-612-51A manual 274

Chapter 41 Commands Summary

Table 88	Commands (continued)
CLASS		COMMAND	PARAMETERS	DESCRIPTION	P
		smcast set	<adsl_port> <mac>	Use join/leave to add/ remove	H/H
			<joinleave>	multicast MAC addresses on
				specified ADSL ports, a range of
				ADSL ports or all ADSL ports.
				MAC example: 01005E010203
		smcast delete	<mac>	Removes a static multicast filter	H/H
				entry by deleting the associated
				MAC address.
		isolation show		Displays the subscriber isolation	M/L
				feature’s current setting.
		isolation enable		Turns the subscriber isolation	H/H
				feature on.
		isolation disable		Turns the subscriber isolation	H/H
				feature off.
		isolation		Set switch mode to daisychain	H/H
		daisychain		mode
		isolation		Set switch mode to standalone	H/H
		standalone		mode
ip
		show	[inbandoutband]	Displays the Management IP	M/L
				address settings.
		arp show		Displays the device’s IP Address	M/L
				Resolution Protocol(ARP) table.
		arp flush		Clears the device’s IP Address	H/H
				Resolution Protocol(ARP) table.
		set	<ip>[/netmask]	Sets the Management IP address	H/H
				and subnet mask.
		gateway	<gateway ip>	Sets the IP address of the	H/H
				device’s default gateway.
		route show		Displays the routing table.	M/L
		route set	<dst ip>[/netmask]	Adds a routing table entry.	H/H
			<gateway ip>
			[metric] <name>
		route set	default <gateway	Sets the device’s default route.	H/H
			ip> <metric>
		route delete	<dst ip>[/netmask]	Removes a routing table entry.	H/H
		route flush		Clears the routing table.	H/~
		ping	<ip> [count]	Pings a remote host.	M/L
statistics
		monitor		Displays hardware monitor status.	M/L
		adsl show	[portlist]	Displays ADSL port connection	M/L
				status.
		adsl linedata	<portlist>	Displays the line data load per	M/L
				symbol (tone).
		adsl lineinfo	<portlist>	Displays the info of the specified	M/L
				ADSL ports.

274
	IES-612-51A User’s Guide