Chapter 47 IGMP Commands

47.6.2 IGMP Count Enable Command

Syntax:

ras> switch igmpsnoop igmpcount enable <portlist>

where

<portlist>

= You can specify a single DSL port <1>, all DSL ports <*>

 

or a list of DSL ports <1,3,5>. You can also include a range

 

of ports <1,5,6~10>.

This command turns on the IGMP count limit for the specified DSL port(s).

The following command turns on the IGMP count limit for port 4.

Figure 181 IGMP Count Enable Command Example

ras> switch igmpsnoop igmpcount enable 4

47.6.3 IGMP Count Set Command

Syntax:

ras> switch igmpsnoop igmpcount set <portlist> <count>

where

<portlist>

=

You can specify a single DSL port <1>, all DSL ports <*> or

 

 

a list of DSL ports <1,3,5>. You can also include a range of

 

 

ports <1,5,6~10>.

<count>

=

0..16; the maximum number of IGMP groups subscribers on

 

 

the specified port(s) can join.

This command sets the IGMP count limit for the specified DSL port(s).

The following command sets a IGMP count limit of 2 for port 4.

Figure 182 IGMP Count Set Command Example

ras> switch igmpsnoop igmpcount set 4 2

47.6.4 IGMP Count Show Command

Syntax:

ras> switch igmpsnoop igmpcount show [portlist]

320

 

IES-612-51A User’s Guide