Chapter 6 Home and Port Statistics Screens
Table 5 Home (continued)
LABEL | DESCRIPTION |
Media | This field displays the type of media that this Ethernet port is using for a |
| connection. |
|
|
Duplex | This field displays whether the port is using half or |
| “ displays when the port is disabled or not connected. |
|
|
Up Time | This field shows the total amount of time in hours, minutes and seconds the |
| port’s connection has been up. |
| connected. |
|
|
| The following fields are related to the xDSL ports. |
|
|
xDSL | This identifies the xDSL port. Click a port number to display that port’s statistics |
| screen. The DSL Port Statistics Screen appears. See Section 6.1.2 on page 79. |
|
|
Status | This field shows whether the port is connected (Up) or not (Down). |
|
|
Mode | This field shows which ADSL operational mode the port is set to use. |
| displays when the port is not connected. |
|
|
Up/Down stream | This field shows the number of kilobits per second that a port is set to transmit |
| and receive. |
|
|
Interleave/Fast | This field shows the port’s ADSL latency mode (fast or interleave). |
|
|
Up Time | This field shows the total amount of time in hours, minutes and seconds the |
| port’s connection has been up. |
|
|
| The following fields and buttons apply to the whole screen. |
|
|
Poll Interval(s) | The text box displays how often (in seconds) this screen refreshes. You may |
Set Interval | change the refresh interval by typing a new number in the text box and then |
| clicking Set Interval. |
Stop | Click Stop to halt system statistic polling. |
|
|
Port | Select a port from the Port |
Clear Counter | erase the recorded statistical information for that port. |
|
|
Reset | Click this to set the Poll Interval(s) and Port fields to their default values and to |
| refresh the screen. |
|
|
Use this screen to display statistics about an Ethernet port. To open this screen, click an Ethernet port’s number in the Home screen.
76 |
| |
| ||
|
|
|