20

Filtering

This chapter describes how to configure the Packet Filter screen.

20.1 Packet Filter Screen

Use this screen to set which types of packets the IES-612-51A accepts on individual DSL ports.

To open this screen, click Advanced Application, Filtering.

Figure 80 Packet Filter

The following table describes the labels in this screen.

Table 46 Packet Filter

LABEL

DESCRIPTION

Port

Use this drop-down list box to select a DSL port for which you wish to configure

 

packet type filtering. This box is read-only after you click on one of the port

 

numbers in the table below.

 

 

PPPoE Only

Select this to allow only PPPoE traffic. This will gray out the check boxes for

 

other packet types and the system will drop any non-PPPoE packets.

 

 

 

Select the check boxes of the types of packets to accept on the DSL port. When

 

you clear one of these check boxes, the field label changes to Filter Out and

 

the system drops the corresponding type of packets

 

 

 

171

IES-612-51A User’s Guide