3Click the RDP tab, as appropriate.

4For servers only, in the IP Address field, enter an IP address in dot notation or a 1-128 character domain name. Spaces are not allowed. Duplicate addresses are allowed. You may use an IPv4 or an IPv6 address.

5In the Port field, enter a port number in the range 23-65535. If blank, port 23 is used.

6Mark to enable or clear to disable the Use Default checkbox. When this setting is enabled, the default global setting specified in Options will be used and all other portions of the Application to Launch area are disabled.

7Enter the directory path and name or click the Browse button to locate the path and name.

8Enter command-line arguments in the box below the path and name. - or -

To insert a predefined macro at the cursor location in the command-line, click the Insert Macro list box and select a macro from the drop-down menu. The Remote Console Switch Software will automatically replace these variables when the application runs.

9Enable/disable the Launch in command window checkbox. When enabled, the user-specified RDP application will be launched from within an OS command window.

Figure 4-15. Server RDP Properties tab

Remote Console Switch Software Basic Operations

88

Page 105
Image 105
Dell 2321DS manual Server RDP Properties tab