Accessing Scan Mode from the On-board Web Interface
Figure 5-12. On-board Web Interface - Scanning Servers
To access Scan mode in the
1In the
2Select the check boxes next to the servers you want to scan.
3Click Scan.
Thumbnail View Status Indicators
The green LED indicates that a server is currently being scanned. The red X indicates that the last scan of the server was not successful. The scan may have failed due to a credential or path failure (the server path on the Remote Console Switch was not available), or because of some other reason. When the mouse pointer is placed on the red X a tool tip appears and indicates the reason for the failure.
Setting up your Scanning Preferences
To set scan preferences:
Using the Viewer
