Figure 9-1. On-board Web Interface - Network Subcategory
Configuring the Network Time Protocol Settings
The switch must have access to the current time to verify that certificates have not expired. You can configure the switch to request time updates from the network time server (NTP).
To configure NTP settings in the
1Click the Configure tab, then click Remote Console Switch - NTP.
2Click the Enable NTP box.
3Enter the name of your network time source in the provided boxes. You may also set an hour interval to specify how often to request time updates. If the interval is set to 0, requests will only be made during appliance startup or when changes to the Global - NTP menu are made.
4Click Save.
183
LDAP Feature for the Remote Console Switch
