Figure 7-14. Upgrade Switch Firmware Window

4Click the Upgrade button. The Upgrade button dims and a progress message and progress bar appears.

5When the upgrade is complete, the Remote Console Switch will reboot.

NOTICE: Do not power down the Remote Console Switch while it is upgrading.

You can upgrade firmware for all SIPs of a given type. To simultaneously upgrade multiple SIPs:

1Click the Tools tab in the on-board web interface. The Tools window appears.

2Click the Upgrade SIP Firmware button. The Upgrade SIP Firmware window appears.

3Click the check box in front of each type (PS/2,USB, USB2, Serial, or Sun) of SIP you wish to upgrade.

NOTE: A disabled check box indicates that all SIPs of that type are running the correct firmware, or that no SIP of that type exists in the system.

Managing Your Remote Console Switch Using the On-board Web Interface

160

Page 177
Image 177
Dell 2321DS manual 160, Upgrade Switch Firmware Window