NOTICE: Once you migrate a Remote Console Switch, you will not be able to use the Remote Console Switch Software AMP. Use the
To migrate Remote Console Switches:
1Select Tools - Migrate in the Explorer. The Migration Wizard welcome page opens. Click Next.
2All switches that qualify for migration will appear in the Available Remote Console Switches list. Select the switch you wish to migrate and click the > button to move the switch to the Remote Console Switches to migrate list.
NOTE: If the Remote Console Switch you want to migrate is not available in the Migration Wizard, you may have exited the AMP before the firmware upgrade was complete. Close the Migration Wizard, then open the AMP to allow the upgraded firmware version to be detected. When you open the Migration Wizard again, the Remote Console Switch will be available.
3Click Next.
4It is recommend to use the Remote Console Switch information stored in the local database when migrating switches. To do so, select the check box on the Use Local Database Information window.
If you do not wish to use local database information, clear the check box.
5Type the HTTP and HTTPS port numbers in the HTTP Port and HTTPS Port fields, respectively, if the port numbers were changed for the Remote Console Switch in the serial console. For more information on changing the port numbers in the serial console, see "To configure the HTTP and HTTPS ports:" on page 19.
NOTE: If you chose to add multiple Remote Console Switches, any that do not use the HTTP and HTTPS ports you specify will fail migration. You can migrate them by running the Migration Wizard again and specifying the correct ports for those Remote Console Switches.
6Click Next.
Migrating Your Remote Console Switch
