menu appears. Select Manage Remote Console Switch. -or-
Click a Remote Console Switch in the Unit Selector pane and press <Enter>. A password prompt appears.
NOTE: If there is a Configure Remote Console Switch task button, rather than a Manage Remote Console Switch task buton, that Remote Console Switch has already been migrated to the
3Type your username and password and click OK. The AMP dialog box appears.
Upgrading Firmware Using the AMP
The SIPs can be upgraded individually or simultaneously. When an upgrade is initiated, you will see a progress bar. As long as an upgrade is in progress, you cannot initiate another.
NOTE: For the
Upgrading Remote Console Switch Firmware
To upgrade Remote Console Switch firmware:
1Click the Tools tab in the AMP. The Tools dialog box appears.
2Click the Upgrade Remote Console Switch Firmware button.
If you have made changes in the Settings panel of the AMP, but have not yet applied them before starting an upgrade, a warning message prompts you to confirm the upgrade because the upgrade process requires an appliance reboot. If you do not apply the pending changes, they will be discarded before upgrading the firmware.
To apply those changes before the upgrade:
a Click No to cancel the appliance firmware upgrade. b Click Apply.
Migrating Your Remote Console Switch