the cascaded switch is visible on screen. When you select from the list, the Modify button is enabled, allowing you to assign it the appropriate number of ports.

NOTE: The Modify button is available only if a configurable switch is selected.

To access the Server dialog box:

1Press <Print Screen> to launch the OSCAR interface. The Main dialog box appears.

2Click Setup - Devices. The Devices dialog box displays.

Figure 3-7. Devices Dialog Box

When the Remote Console Switch discovers a cascaded switch, the port numbering changes to accommodate each device under that switch. For example, if the switch is connected to ARI port 6, the switch port is listed as 06 and each device under it is numbered sequentially 06-01, 06-02 and so on.

NOTE: Changes made in the Device Modify dialog box are not saved until you click OK in the Devices dialog box.

To assign a device type:

1In the Devices dialog box, select the desired port number.

2Click Modify. The Device Modify dialog box displays.

49

Controlling Your System at the Analog Ports

Page 66
Image 66
Dell 2321DS manual Devices Dialog Box