Dell 2321DS manual Controlling User Status, 162

Figure 7-16. SIP Version Window

4Compare the current information to the Firmware Available field to see the firmware upgrade available for the SIP. (You can load firmware even if the current and available versions are the same. In some cases, you can downgrade the SIP to an older, compatible version.)

5Click the Load Firmware button.

6The firmware upgrade begins. During the upgrade, a progress message is displayed below the Firmware Available box and the Load Firmware button will dim. When the upgrade is finished, a message appears indicating that the upgrade was successful.

7Repeat steps 2-6 for each individual SIP you wish to upgrade.

8When finished, click OK.

Controlling User Status

You may view and disconnect the current active user connections using the Status tab in the on-board web interface. You can view the session type, the server name, or SIP to which they are connected and their system address. In addition to disconnecting a user session, the Remote Console Switch Software also allows one user to take control of a server currently being used by another user. For more information, see "Preemption" on page 125.

Managing Your Remote Console Switch Using the On-board Web Interface

162