2Click OK to save the settings and return to the Setup dialog box. Click X or press <Escape> to return to the Main dialog box.
3Click Commands. The Commands dialog box displays.
4Click the Broadcast Enable checkbox to activate broadcasting. The Broadcast Enable Confirm/Deny dialog box displays.
5Click OK to enable the broadcast. Click X or press <Escape> to cancel and return to the Commands dialog box.
6If broadcasting is enabled, type the information and/or perform the mouse movements that you would like to broadcast from the user station. Only devices in the list are accessible.
NOTE: Any other user is disabled when broadcast mode is enabled.
To turn broadcasting off:
From the Commands dialog box, clear the Broadcast Enable checkbox.
Power Controlling Devices
You can control supported PDUs through the OSCAR interface.
NOTE: This feature is only available on the 2321DS Remote Console Switch.
Power window
Through the Power window, you can view which outlets control which devices and whether the outlet is on or off. You can also turn on, turn off or cycle power to a selected device. The status of each outlet is indicated by one or more status symbols in the right column. The following table describes the status symbols.
Table 3-5. Power Window Status Symbols
Symbol | Description |
|
|
| Outlet is on. |
| Outlet is off. |
| Outlet is waiting to go on. |
Controlling Your System at the Analog Ports
60
