Trap | Trap Message | Severity | Description |
ID |
|
|
|
|
|
|
|
30 | Subsystem | Informational | The Remote Console Switch has detected a |
| upgrade failed. |
| special condition resulting in a failed |
| Device ID: %s. |
| subsystem update. The condition has been |
|
|
| recorded is stored in the |
|
|
| dsTrapObjectFirmwareCondition object. |
31 | Warning | Minor | The Remote Console Switch has detected a |
| condition. |
| special condition to be trapped for warning |
| Device ID: %s. |
| the operator. The condition indicates some |
| Alarm condition: |
| parameter outside of normal operation, such |
| %d. Alarm |
| as over temperature range. These are not |
| description: %s. |
| expected to result in unusual behavior, but |
|
|
| may be precursor to a subsequent urgent |
|
|
| condition. |
32 | Urgent | Critical |
| condition. |
|
| Device ID: %s. |
|
| Alarm condition: |
|
| %d. Alarm |
|
| description: %s. |
|
33 | User account | Minor |
| has been locked. |
|
Client IP
Address: %s.
Locked user: %s.
Reason: %s.
The Remote Console Switch has detected a special condition to be trapped for alerting the operator. The condition indicates some parameter outside of normal operation that is expected to result in unpredictable system behavior.
A user account has been locked.
The IP address of the client is contained in dsTrapObjectIPAddress.
The name of the user who was locked is contained in dsTrapObjectTargetUserName.
The reason for which the user account has been locked is contained in dsTrapObjectLockReason.
Appendix D: MIBs and SNMP Traps