Figure 4-5. Configure Tiered Switches Dialog Box
10When complete, click Finish to exit the Wizard and return to the main window. Your Remote Console Switch should now be in the Unit Selector pane.
To discover a Remote Console Switch:
1Select Tools - Discover from the Explorer menu from the Remote Console Switch Software. The Discover Wizard appears. Click Next to continue.
2The Address Range page appears. Complete one of the following steps:
If you are using IPv4 mode, select Use IPv4 address range, and type the range of IP addresses you wish to search on the network in the To Address and From Address boxes. Use the IP address dot notation xxx.xxx.xxx.xxx.
If you are using IPv6 mode, select Use IPv6 subnet, and specify the IPv6 network prefix.
3You may also change the default HTTP and HTTPS port numbers, if the Remote Console Switch has changed from the default on the serial console, by typing the new port numbers in the HTTP Port and HTTPS Port fields. Click Next to continue.
73
