7The Adding Remote Console Switches progress bar appears while the new switches are being added. Once all of the selected switches have been added to the local database, the Discover Wizard Completed page appears. Click Finish to exit the Wizard and return to the main window. Your new switches should now be in the Unit Selector pane.
8If one or more switches could not be added to the local database for any reason (including if you clicked Stop during the add process), the Discover Wizard Not All Remote Console Switches Added page appears. This page will list all of the switches that you selected and the status for each. The status will indicate if a Remote Console Switch was added to the local database and if not, why the process failed. Click Done when you are finished reviewing the list.
NOTE: If a Remote Console Switch already exists in the database with the same IP address as a discovered unit, then the discovered switch will be ignored and will not display on the next Wizard page.
Accessing Your Remote Console Switch
When you click the Remote Console Switches tab in the Remote Console Switch Software, you will see a list of the switches currently defined in the local database. To access a Remote Console Switch, you must first log into it by typing a username and password. The default username is Admin (case sensitive) with no password. Once you have logged in to a particular Remote Console Switch, the Remote Console Switch Software will cache the username and password in memory for the duration of the Remote Console Switch Software session.
NOTE: You can clear the login credentials an
75
