8Enter the Location ID. This is a descriptive title up to 16 characters long. Refer to the instructions below.
•To enter numbers, use the numeric keypad (press once)
•To enter spaces, press the 19/Space
•To enter hyphens
•To enter alphabet characters, locate the character you want on the numeric keypad. Press that key repeatedly until the character appears in the display.
•To enter a unique character, press the 0/Unique key repeatedly until the character you want appears in the display. The following characters are available: Symbols: ! # & ‘ ( ) * + ,
Internet characters: @ \ “ _ % - l
The - l functions as a tilde symbol. Umlaut characters: Ä ß Ñ Ö Ü Norwegian characters: Æ Å Ø æ å ø
•To enter two successive letters/numbers on the same key, press the No ▶ key to move to the next character.
•To move the cursor to make corrections, press the Yes
◀and No ▶ keys
9Press the Start key to finish programming the
AUTO DIAL NO. [ ]
10To continue programming Auto Dial numbers, go back to Step 4.
If you are finished, press the Select Function key.