User Function Settings List

01 MCF(SINGLE-LOC.)

This function automatically prints a Message Confirmation Report after each single-location transmission or polling transmission. The report provides information about the transmission.

Refer to “Reports, Message Confirmation Report.”

Available settings are ON and OFF (default).

02MCF(MULTI-LOC.)

This function automatically prints a Message Confirmation Report after each multiple-location transmission. The report provides information about the transmission. Refer to the “Reports, Message Confirmation Report” section of this document.

Available settings are ON (default) and OFF.

03 ERR REPORT (MCF)

This function automatically prints a Message Confirmation Report every time an error occurs during a transmission or polling transmission operation. The report provides information about the transmission.

Refer to “Reports, Message Confirmation Report.”

Available settings are ON (default) and OFF.

04 IMAGE IN MCF

When a message confirmation of a memory transmission is printed, this function adds a portion of the first page of the document that was sent. This feature makes it easier to identify a fax, but it may present security problems if you are sending sensitive documents.

Available settings are ON (default) and OFF.

52 OKIFAX 5650

Page 60
Image 60
Oki 5650 manual User Function Settings List, Mcfsingle-Loc