7Enter the Location ID. This is a descriptive title up to 16 characters long. Refer to the instructions below.

•To enter numbers, use the numeric keypad (press once)

•To enter spaces, press the 19/Space One-Touch key

•To enter hyphens (-), press the Hyphen key

•To enter alphabet characters, locate the character you want on the numeric keypad. Press that key repeatedly until the character appears in the display.

•To enter a unique character, press the 0/Unique key repeatedly until the character you want appears in the display. The following characters are available: Symbols: ! # & ‘ ( ) * + , - . / : ; = ? ·

Internet characters: @ \ “ _ % - l

The - l functions as a tilde symbol. Umlaut characters: Ä ß Ñ Ö Ü Norwegian characters: Æ Å Ø æ å ø

•To enter two successive letters/numbers on the same key, press the No ▶ key to move to the next character.

•To move the cursor to make corrections, press the Yes

◀and No ▶ keys

8Press the Start key. The display shows (for about three seconds).

NO=<OR LOCATION>

9Enter the optional alternate fax number, if desired. Refer to the instructions following Step 5.

10Press the Start key to finish programming the One-Touch key.

The display shows

LOCATION PROGRAMMING.

11To continue programming One-Touch keys, go back to Step 3. If you are finished programming, press the Select Function key.

12Lift off the plastic cover above the One-Touch label. Using a pencil, write in the location name for your One- Touch key(s). Then replace the cover.

!Print the Phone Directory when you finish programming. This provides a reference of the speed

dial numbers already programmed.

To obtain additional One-Touch key labels, refer to the “Options and Consumables.”

98 OKIFAX 5650

Page 106
Image 106
Oki 5650 manual Internet characters @ \ % l, NO=OR Location