11 (Transmit) Resolution/Yes ßkey
After you load a document, use this key to change the transmission resolution used. Use STD for standard originals, FINE and EX.FINE for detailed or small print originals, and PHOTO for originals that include colors or many shades of gray.
Use this key also as the Yes ◀ key when making selections or to move your cursor to the left while entering information.
12 Redial key
Press this key to manually redial the last number dialed.
13 Type of Original/No ©key
Use this key to select the document contrast after you load a document for transmission. Use:
LIGHT for originals that are too light.
NORMAL for documents with good contrast.
DARK for originals that are too dark.
Use this key also as the No ▶ key when making selections or to move your cursor to the right while entering information.
14 Copy key
After loading a document, press this key to make a copy. When no documents are loaded, press this key once to display a Message Confirmation Report about your last transmission on the LCD Display Panel, and a second time to receive a printed report. You can also use the Copy key to program a manually entered fax number into a One- Touch key or Auto Dial number. Refer to the “Programming Speed Dial Numbers,
15 Alarm indicator
This indicator glows red and an alarm sounds to notify you of any problem that occurs. Check the display panel for an explanation of the problem. To turn the alarm indicator off, press the Stop key and correct the problem.
16 Stop key
This key cancels the operation currently in progress and turns off the Alarm Indicator. After loading paper, installing a new toner cartridge, or correcting an alarm condition, press this key to turn off the Alarm Indicator. While you are programming, pressing the Stop key takes you back