![](/images/new-backgrounds/1203826/203826239x1.webp)
9 Example — Unspecified Connection from a PC Application
Activity
3.
You can select the partner, however, only if it already exists in the project.
In this example, you configure an unspecified connection.
In the case of an S7 connection, no project engineering data whatsoever is required on the partner. In the connection partner for station field, select “(unspecified)”. In the connection for type field, select “S7 connection”.
To be able to establish the connection, the partner station must be specified by the network address and access point of the partner application (slot).
Confirm with OK.
120 | Commissioning PC Stations - Manual and Quick Start |
Release 5/2005 |