
16 Configuration Console Tool
16.4.3Displaying PROFIBUS Network Nodes
If the module is operational, a list with all the nodes on the bus is created after starting this function.
If the module is currently communicating and the module supports the function, the list of bus parameters is created from local information of the module.
If the module is not currently communicating or the module does not support the creation of a local list, the station addresses are queried over the network.
This creates load on the bus and can take several seconds.
Follow the steps outlined below...
1
Activity
Open the “Modules” folder in the navigation area.
Select the relevant module.
Click on the “Bus nodes” property object.
236 | Commissioning PC Stations - Manual and Quick Start |
Release 5/2005 |