![](/images/new-backgrounds/1203826/203826447x1.webp)
16 Configuration Console Tool
16.3Editing the Configuration
Overview
During configuration you can do the following:
SChange the mode of the module and set the index
SSet the Industrial Ethernet network parameters
SSet the Industrial Ethernet station addresses for the CP 1613
SAssign the application access points to the individual modules
SSet the PROFIBUS DP slave mode
These options are described in the following sections 16.3.1 to 16.3.5.
16.3.1Changing the Mode of a Module
When you first commission a module (initial configuration), the mode is specified by using the Station Configuration Editor.
Under some circumstances, it may be useful to change the operating mode of the module:
SIf you want to use the module for other purposes
SIf the bus parameters of the network were changed and you want to adapt the module to these parameters
SIf you want to process the module again with the Commissioning Wizard
If you want to change the operating mode of a module.....
1
Activity
Open the “Modules” folder in the navigation area.
Select the required module.
Click on the “General” property object.
224 | Commissioning PC Stations - Manual and Quick Start |
Release 5/2005 |