Siemens C79000-G8976-C156-07 quick start Changing an Access Point, Step Description

4 Using Additional Functions - Special Features to Note

Step Description

1Start the “Configuration Console” program (taskbarStart " Simatic "

SIMATIC NET " Configuration Console).

2

3

In the navigation area, go to the branch SIMATIC NET Configuration Access Points.

After right-clicking on the branch end “Access Points”, select the menuNew

"New Access Point " “New Access Point” dialog.

4

Enter the name of the new access point.

Changing an Access Point

The access point is assigned to the network card using the “Configuration Console” program.

Follow the steps outlined below to assign an access point to a network card.

Step Description

1Start the “Configuration Console” program (taskbarStart " Simatic "

SIMATIC NET " Configuration Console).

2In the navigation area, select the “Access Points” branch under SIMATIC NET Configuration.

3

4

Double-click on the required access point in the right-hand list box, for example, “S7ONLINE”.

Reaction:

The “Properties of S7ONLINE” dialog box opens.

Select the interface over which you want to communicate in the “Associated interface parameter assignment” list box and click “OK”.

54	Commissioning PC Stations - Manual and Quick Start
	Release 5/2005

C79000-G8976-C156-07