
16 Configuration Console Tool
If you want to assign an access point of an interface parameter assignment to a
module.....
1
Activity
Open the “Access points” folder in the navigation area.
2
3
4
Set the interface parameter assignment to be assigned to the access point.
If the module is used in the “configured mode”, the active interface parameter assignment is fixed and cannot be modified.
“Apply” the settings.
Notice
Important for PROFIBUS modules:
With PROFIBUS modules, only one interface parameter assignment can be activated at any one time. If you select a different interface parameter assignment from the currently active interface parameter assignment when assigning an access point, this interface parameter assignment is activated and assigned to ALL access points!
230 | Commissioning PC Stations - Manual and Quick Start |
Release 5/2005 |