13 SIMATIC NCM PC Project Engineering Tool
13.7Configuring Connections
Meaning
During operation, configured connections are established either implicitly or on request, depending on the parameter assignment. They are then available to the OPC Server or the PC application for communication.
General Rules
Regardless of the application type, the general rules for connection configuration apply:
1
SCommunication connections are always assigned to an application.
SIn the PC station, the CP that supports the type of connection is used for the data transfer.
SIf there is more than one CP with this capability, you can use Routing to select the transmission path.
Follow the steps outlined below:
Select the application to which you want to assign a connection.
2
Enter the desired connection type. You will be requested to specify the negotiating partner.
Commissioning PC Stations - Manual and Quick Start | 175 |
Release 5/2005 |
