Hardware and Software Installation | Siemens C79000-G8976-C156-07

10Example — SNMP Communication with OPC

10.1Hardware and Software Installation

Installing the Software

Activity

1.Turn on the PC and start Windows.

2Insert the SIMATIC NET 11/2003 CD. If the installation program does not start the CD automatically, start the start.exe program on the CD.

3.Follow the on-screen instructions of the installation program. Install the SIMATIC NET PC software and SIMATIC NCM PC.

Installing the Network Adapter

Activity

1.Shut down the PC and turn it off.

2Disconnect the power cable.

3.Read the instructions for installing cards in the manufacturer’s instructions for your PC.

4.Follow the installation instructions for your network adapter and install it.

5.Close the PC casing again as described in the instructions of your PC manufacturer and then insert the network cable.

Attaching to the Network

Activity

1.Connect the network cable to your network adapter.

2.Connect the SNMP-compliant device to the network cable.

3.Assign an IP address to the SNMP-compliant device using a device-specific or vendor-specific project engineering tool.

Commissioning PC Stations - Manual and Quick Start	129
Release 5/2005

C79000-G8976-C156-07

Image 129

Siemens C79000-G8976-C156-07 quick start Hardware and Software Installation, Installing the Network Adapter

Contents

Commissioning PC Stations Manual and Quick Start Classification of the Safety-Related Notices Trademarks Safety Instructions Regarding your ProductQualified Personnel Correct Usage of Hardware Products Copyright E Siemens AG 2001- 2005 All rights reserved Prior to Startup This manual Validity of this Manual Additional Information on Simatic S7 and Step Conventions Symbols used in this manual Contents Examples 147 128153 160 192 190203 240 266 252276 281 Characteristics Comparison with Previous Products Welcome to Advanced PC ConfigurationNew Concept for Your Benefit Supported Modules LDB Databases no Longer Required Use of PCs in Automation PC Stations in SimaticVirtual rack in the PC station PC Station Software The OPC Server as Central Component NCM PC Uniform Engineering Environment Index for Every Component Brief Introduction to Tools and Utilities PG Operation or Configured Mode Considerations Guide to Installation and Commissioning Mixed operation is possible Characteristics of the Selectable Modes Step How does it work? Tool Commissioning for PG Operation OverviewResult PC station ready for PG/PC operation Result HMI station and applications ready for operation Result PC station is ready for productive communication Commissioning for Configured Mode Overview Project engineering Steps in project engineering of the PC Welcome to Advanced PC Configuration XDB Getting Started Configured Mode Steps in Creating Project Engineering Data Why do we need project engineering data?Result Initial Situation Follow the steps below Steps in Project EngineeringStart Simatic Simatic NCM PC Steps in Project Engineering Steps in Project Engineering Steps in Project Engineering Summary Where to go from here optional activities Why do we need an initial configuration? Steps for Initial Configuration How to Make the Initial Configuration with an XDB File Case a Initial configuration using remote configuration with Getting Started Configured Mode Systray Case b Initial configuration with XDB file Where to we go from here? How to Make the Initial Configuration without an XDB File Initial configuration without XDB file Where to we go from here? Getting Started PG Operation How to Configure for PG Operation Configuration for PG Operation Programming Device PG/PCStart Settings Control Panel Set PG/PC Interface Start Simatic Simatic NET Set PG/PC Interface Setting Communication Parameters Extra Information Configuration for PG Operation HMI Stations Setting Access Points Follow the steps belowHow to Configure for HMI Operation Getting Started PG Operation Getting Started PG Operation Adding items Follow the steps below Entries in the Client Program Getting Started PG Operation Using Additional Functions Special Features to Note Checking the Configuration and DiagnosticsTesting with the OPC Scout Detecting Errors in Communication with the OPC Scout Errors when Connecting with the OPC ServerIntroduction Checking the status of process variables Errors when Adding Variables Further Functions / Special Features How Access Points are used Configuring Access Points for and StepViewing and Setting Access Points Tools Simatic NET Configuration Console Changing an Access PointNew Access Point New Access Point dialog Step Description Points to Note with Softnet Industrial Ethernet Modules ParametersTransferring the Project Engineering Data Where to Find Further Information Project Engineering for the OPC ServerOPC Server Standard Situation Using the Default Settings What Can be Configured in the Project Engineering Database?Using Default Settings or Project Engineering Parameters Significance of Project Engineering Project Engineering for the OPC Server FDL FMS ISO/TCP FDL Connection SEND/RECEIVE Interface FMS Connection S7 Connection S7 Communication Project Engineering for the OPC Server Using Symbols for S7 Connections Significance in Simatic NET Configuring OPC Properties for Snmp in Project Engineering Device Profiles on the Simatic NET Software CD Snmp TrapsGeneric Traps Parameter Meaning Project Engineering for the OPC Server Profinet IO Using the CP 1616 as a Profinet IO Controller/Device CP 1616 as IO Controller CP 1616 as IO Device Assigning the IP address Follow the steps outlined below Initialize CP 1616 IP address and device name Configuring the CP Follow the steps outlined below Using the CP 1616 as a Profinet IO Device Example of a Configuration CP 1616 as Controller + Device Using the CP 1616 as Profinet IO Controller and Device Follow the steps outlined below Example Installing Linux Drivers Suse Linux PNIOSBAD,PNIOSBAD,PNIOSBAD Installing the Profinet IO Sample Program Suse Linux Explanation of the Configuration Example Example OPC Application for Industrial EthernetOverview Initial Situation Installing the Software Hardware and Software InstallationInstalling the CP Attaching to the Network Project Engineering on a Central Engineering Station Creating the Project Using Symbol Files Specifying the Use of Symbol Files Activity Configuring the PC Station OverviewHandling the Project Engineering Data Procedure for Initial Configuration Procedure for Initial Configuration Procedure for Initial Configuration OPC Scout as Client for Commissioning and Testing Using the OPC ScoutEstablishing a Connection to the Server Start Simatic Simatic NET OPC Scout Organizing Process Variables Inserting a Group and Variables Activity Executing Synchronous Write Jobs Displaying and Modifying Values of Variables PROFIBUS-DP Example OPC Application for Initial Situation Activity Configuring the PC Station Procedure for Initial Configuration Procedure for Initial Configuration Changing the Hardware Configuration Preparations Changing the configuration on the PC station 101 CP 5613 as DP Master Inserting a DP Master System ET 200B as DP Slave Inserting a DP Slave 104 Start Simatic Simatic NET Profibus CP5613CP6514 OPC Scout Inserting Groups and Variables Executing Synchronous and Asynchronous Write Jobs 108 Example Unspecified Connection from a PC Application Installing the Software 111 112 113 114 115 Creating a New Project Creating, Editing and Downloading a Project 117 Edit the Network and Connection Project Engineering Data 119 120 121 122 123 Downloading the Project Engineering Configuration 125 Configuration Console Configuration Console 127 Example Snmp Communication with OPC Installing the Network Adapter Configuration of the Snmp OPC Server 131 Editing the Plant Configuration 133 134 Configuring the PC Station 136 137 Using the OPC Scout Inserting a Group 140 Setting the Trap Recipient based on the Example of an Writing ValuesMaximum of Ten Trap Recipients 142 Device Profile Creating a Device Profile with the MIB CompilerMIB Files and MIB Compiler Calling and Handling the MIB Compiler 144 145 146 OPC Example Profinet Communication with Hardware and Software Installation Configuring the PC Station Procedure for Initial Configuration Using Symbol Files Activity Characteristics, Functions and Activation Station Configuration Editor Tool How to Start the Station Configuration Editor Managing Components Components TabArea of Application / Use Cases Assigning the station name Creating new components Setting the Online or Offline Mode Setting the Station Configuration Editor Properties Dialog Evaluating Messages Diagnostics TabChecks and diagnostics How It Works Accept Partial Loading Configuring Activation of Warnings Simatic NCM PC Project Engineering Tool Functions Initial configuration Help Contents How to Start Simatic NCM PCFurther Information in Help Help Introduction Relationship Between Simatic NCM PC and Step Simatic NCM PC and are compatible with each otherNCM PC Can Use Project Data Simatic NCM PC Creating a PC Station PC Station in the ProjectAims Follow the steps below Creating and Managing Objects 167 Creating an Image of the PC Configuration Configuring a PC Station with Simatic NCM PC Config 169 PC Components in the Catalog ApplicationCP Industrial Ethernet Creating the DP Master System Significance of the Configuration Data in a DP Master System 172 Creating a Profinet IO System You will find further information here Profinet IO Devices Configuring Connections MeaningGeneral Rules Connections to S7 Stations Project Engineering for a PC Station as DP Slave DP Master is Known in NCM / StepFollow the steps below Follow the steps outlined below 178 179 Follow the steps outlined below 181 Configuration with a Third party DP Master DP master system for configuring the DP slaveSupplying the DP master with data from the GSD file Examples / model Network, Local Load, and XDB File Online Mode 186 Using the PC Station Wizard Follow the steps below to create and import an XDB file Adapting Mismatched Configurations Station Configuration Editor displays assigned indexesAdapting the Configuration PC Station Wizard How to Start the PC Station Wizard PC Station Wizard supports you in the following situations Range of Functions of the Symbol File Configurator Symbol File Configurator Too How to Start the Symbol File Configurator Start Simatic Simatic NET Settings Symbol File ConfiguratorStructure Converting Old Symbol Files Accessing Process Variables using Symbols Meaning of SymbolsDefinitions Term Meaning Creating and Using Symbol Files When to Use Symbols? Menus of the Symbol File Configurator in Detail Menu Command MeaningFile Menu Edit Menu Window MenuHelp Menu How to Insert a New Symbol Managing Symbols How to Insert a New Folder How to Add a Name Space Prefix How to Delete Folders or SymbolsHow to Import a Symbol File How to Export a Symbol File Characteristics, Function and Activation Configuration Console ToolHow to Start the Configuration Console Programs Simatic NET Settings Configuration Console Structure Triggering a Restart on the Module Support During Commissioning and Operation If you want to trigger a restart on the module Forcing the OPC Server to Close Down If you want to close down the or restart OPC server Activating Configured Protocols Step by Step Configuration Console Tool If you want to use a symbol file for the OPC Server Setting a Symbol File for OPC 212 Setting Traces 214 If you want to create traces of the protocol libraries 216 Language Setting Follow the steps below to change the language settingStep Activity Automatic Startup of Applications and Services 219 Application example Win32 API, see also Msdn Library Security Setting Windows XP + SP2 only 222 Follow the steps below to display the configuration examples Configuration Examples Editing the Configuration Changing the Mode of a ModuleIf you want to change the operating mode of a module 225 Current Setting 227 Setting the Industrial Ethernet Station Addresses Assigning Access Points to the Individual Modules Important for Profibus modules Setting the Profibus DP Slave 232 Displaying the Operability of a Profibus Module Diagnostics with Configuration Console 234 235 Displaying Profibus Network Nodes 237 Displaying Profibus Network Parameters Displaying Version Information of Hardware and Firmware OPC Scout Which functions does the OPC Scout provide?Steps / Functions Meaning Menu Contains commands relating to the following topics How to Start the OPC Scout Connecting the OPC Scout to a Remote Server Connecting the OPC Scout to a Local Server Browsing the Process Space OPC Navigator Create a Group OPC Scout Adding and Monitoring Variables Create New Variables Customizing the Display Display Attributes Meaning of the ColumnsName Meaning Change Values Menu command Has the following functionMenus of the OPC Scout in Detail File Menu Server Menu View Menu Item Menu Group Menu 17.11.6 ? Menu ? menu contains the following commands Calling dcomcnfg Dcom Settings with the dcomcnfg System Program This opens the required properties dialog Dcom Settings with the dcomcnfg System Program Default Properties Tab Description of the SettingsOperation on a Domain Server or in a Workgroup Settings Default Security / Default COM Security / COM Security Tab Default Permissions Meaning Settings for Simple Commissioning New as of Windows XP + SP2 Dcom Configuration / Applications Tab Default Protocols Tab Introduction Configuration of the Server Computer General Tab Registering the OPC Server Location Tab Identity Tab Setting Meaning 266 Security Tab Specifying the Standard Permissions Multiterminal Mode Specifying Access Permissions Specifying Launch Permissions Specifying Configuration Permissions Configuration of the Client Computer Registering the OPC server follow the steps below Registering the OPC Scout as Client Security Settings per User Program Using the Databases and Central Data Management LDB and XDB Databases OverviewConsequences of the New Central Project Engineering Project Engineering up to Simatic NET CD 05/2000 DescriptionPrevious Project Engineering with LDB databases Previous Project Engineering with LDB and XDB Databases Use of Previous Project Engineering Use of Databases and Project Engineering ToolsProtocol Database Type Project Engineering Tool Use What to do Situation TF-1613 up to version 2.1 for Windows 2000 Pro or Windows NT 283 DP 5613 up to version 2.1 for Windows 2000 Pro or Windows NT Windows 98 is no longer supported Situation Description of the Profinet Configuration File Configuration FileStorage location Protocol Cycle Time Parameter AbortConnectionAfter Parameter InitiateTimeout Parameter QualityOfStateValue Parameter Timeout Parameter LAD / CSF / STL References and Literature TCP/IP Order numbers Advanced PC Configuration APC Access pointGlossary Station Manager Project PC Station New in release 01 / 2005 C79000 G8976 C156 Document HistoryPage Simatic NCM PC 300