
A Notes for Users of Older Versions
DP 5613 up to version 2.1 for Windows 2000 Pro or Windows NT 4.0
Situation:
A DP project engineering configuration created with the COM PROFIBUS program cannot be used.
What to do:
A DP project engineering configuration created with the COM PROFIBUS program must be recreated with SIMATIC NCM PC V5.1 Service Pack 2 or higher or STEP 7 Version 5.1 Service Pack 2 or higher.
If the project engineering configuration was already created with STEP 7, this STEP 7 project can continue to be used. You only need to download the project engineering configuration to the CP/PC station from STEP 7 Version 5.1 Service Pack 2 or higher.
Situation:
An FMS project engineering configuration created with the COM PROFIBUS program cannot be used.
What to do:
An FMS project engineering configuration created with the COM PROFIBUS program must be recreated with SIMATIC NCM PC V5.1 Service Pack 2 or higher or STEP 7 Version 5.1 Service Pack 2 or higher.
Situation:
An S7 project engineering configuration created with the COML S7 program cannot be used.
What to do:
A project engineering configuration created with the COML S7 program must be recreated with SIMATIC NCM PC V5.1 Service Pack 2 or higher or STEP 7 Version 5.1 Service Pack 2 or higher.
If the project engineering configuration was already created with STEP 7 (XDB), this STEP 7 project can continue to be used. You only need to download the project engineering configuration to the CP/PC station from STEP 7 Version 5.1 Service Pack 2 or higher.
284 | Commissioning PC Stations - Manual and Quick Start |
Release 5/2005 |